The government of Luxembourg and the Bavarian Ministry of Economic Affairs, Regional Development and Energy together with the Bavarian State Ministry of the Environment and Consumer Protection both published documents on Interreg proejct in their regions (Luxembourg and Bavaria). The documents are available in french (Luxembourg) and german (Bavaria). Read More
Di-Plast—Digital Circular Economy for the Plastics Industry
Di-Plast @InnoZent OWL "Workshop: High-end plastic recycling through digital tools"
27-05-2021 - 27-05-2021, Lemgo/Online
InnoZent OWL e.V., invited our Di-Plast experts in the context of CirQuality OWL to present our knowledge regarding digital tools for the plastics industry in a workshop. Read moreView more
Di-Plast featured in publications on Interreg projects in Luxembourg and Germany
Posted on 14-05-2021
The government of Luxembourg and the Bavarian Ministry of Economic Affairs, Regional Development and Energy together with the Bavarian State Ministry of the Environment and Consume... Read more
Stichting Polymer Science Park
University of Luxembourg
6 Rue Richard Coudenhove-Kalergi
East Netherlands Development Agency
40 Laan van Malkenschoten
Umwelttechnik BW GmbH State Agency for environmental Technology and Resource Efficiency
Tilburg University (JADS)
Wuppertal Institute for Climate Environment Energy gGmbH
|Wuppertal Institute for Climate Environment Energy gGmbH||
|SKZ-KFE gGmbH||Hermann Achenbachfirstname.lastname@example.org||Germany|
|Stichting Polymer Science Park||Mireille Kinket||M.email@example.com||Netherlands|
|University of Luxembourg||Peter Plapperfirstname.lastname@example.org||Luxembourg|
|East Netherlands Development Agency||Jan Jonkeremail@example.com||Netherlands|
|Umwelttechnik BW GmbH State Agency for environmental Technology and Resource Efficiency||Jonas Umgelterfirstname.lastname@example.org||Germany|
|Tilburg University (JADS)||Martin Atzmulleremail@example.com||Netherlands|
Open Call to co-create digital tools
If you are looking for solutions to analyse, improve, evaluate and use data for process optimisation, we offer you to join our co-creation process (Pilots). You can participate in either one or more pilots with the topics:
Process Analytics and
Value Stream Management.
For more information, please dowload the open call document below or contact our pilot coordinator Heicke Gaedeke.
To apply, please get in contact with Mrs. Gaedeke via e-mail. The application period ends on the 21st of June 2021.
Phone: +49 931 4104-265
Previous calls to participate in the Di-Plast Project
The first Uptake Accelerator workshop took place at the 30th of March 2021. The companies have been informed on the goals of Di-Plast and learned in three different breack-out session more about our digital solutions.
More workshops are planned in the upcoming future.
The Webinar was hosted on the 12th of December 2019 from 15:00 - 17:00 pm (CET) by our Dutch project partners Jurgen van den Hoogen & Stefan Bloemheuvel, who are affiliated with the Jheronimus Academy of Data Science. Please click here to watch the video. The video contains the following agenda:
00:00 - 08:15 General Information on the Project
08:15 - 37:51 Information on the tools
37:51 - 54:05 Question and Answers
Companies, which would like to increase the amount of recycled materials in their processes and improve the quality in process and product by using digital tools were invited to apply until the 15th December 2019 to participate in the Di-Plast pilot. Within the pilots, companies can directly influence the development of the tools and ensure that the functions of the tools are tailored to their needs.
With our survey we got first insights into the challenges when using recyclate.
The next step are expert interviews in order to get a deeper understanding of the challenges when using recyclate. If you have specific challenges in your value chain while using recyclate, you might be an interesting partner for such an interview. Don't hesitate to contact one of the partners on the landing page that fits best for your convenience. Tell us which tools would help you to improve the uptake of recyclate.
Di-Plast needs participation of related partners from the plastics value chain. Stakeholders from along the value chain are important for the results (and success) of the project. In each phase of the Project inputs from stakeholders influence the progress of Di-Plast and also results from the project can be used by stakeholders in order to improve their use of recycled plastics material.
The next opportunity to be part of it will be our survey regarding the requirements of enterprises that handle plastics material.
The Survey will start in March 2019, so stay in contact or better: if you are interested send an E-Mail to one of the Partners on the startpage.
And there will come many more opportunities to participate for Partner from the NorthWestEurope Area. Feel free to ask.
Publication on VSM at the 9th International Conference on Mass Customization and Personalization – Community of Europe in Novi Sad, SerbiaPosted on
The University of Luxembourg, one of our project partner, just published an introducing article on VSM at the 9th International Conference on Mass Customization an Personalization – Community of Europe in Novi Sad, Serbia. Read More
Kunststof Magazin: Di-Plast appears in most important Plastic-Magazin for ther Netherlands and BelgiumPosted on
Di-Plast is, among others, named in the article “Nieuwe standaarden smeerolie voor circulaire motor” (New standards lubricating oil for a circular engine) as one of the interesting projects to improve the uptake of recyclates in the Netherlands and the EU. Read More
Article about Di-Plast Pilots and Voucher scheme published in Oost-Gelderland-Business Magazin Nr 5 2019 Read More
The Di-Plast Webinar held on the 12th of December 2019 is now online Read More
The open call for participating in the Di-Plast pilots has started. Apply until the 15th of December Read More
The Di-Plast consortium nominated six uptake manager to actively support companies on implementing the developed toolkits to increase rPM. Read More
We offer two co-creation workshops in the coming month to refine the tools of the toolkit and the pilot strategy in order to insure that the toolkit meets the industry’s needs and to involve potential industry partners for the pilots and the uptake acceleration programme. Read More
Thanks for participating in our survey about the use of recyclate - the survey is closed - next step are personal interviewsPosted on
Our survey on the use of plastic recyclate was aimed at companies from the entire value chain. With your participation you contributed to the knowledge base for the development of our toolbox. The Toolbox will be designed to provide digital solutions that improve the use of recyclate. The more precisely you answer the questions, the better we can design the solutions. Join in and benefit from the results later. The survey is anonymous. If you are interested in using the resulting tools, you can contact us directly via the addresses on the start page. The survey is available in English and German. Thank you very much again for helping us developing useful tools! The next step are expert interviews in order to get a deeper understanding of the challenges when using recyclate. If you have specific challenges in your value chain while using recyclate, you might be an interesting partner for such an interview. Don't hesitate to contact one of the partners on the landing page that fits best for your convenience. Tell us which tools would help you to improve the uptake of recyclate. Read More
With our survey we got first insights into the challenges when using recyclate. The next step are expert interviews in order to get a deeper understanding of the challenges when using recyclate. If you have specific challenges in your value chain while using recyclate, you might be an interesting partner for such an interview. Don't hesitate to contact one of the partners at the bottom of the landing page (overview). Tell us which tools would help you to improve the uptake of recyclate. Read More
Sustainability and recycling have become more and more relevant within society. The public opinion is shifting more towards a world where recycled plastics becomes the norm to reduce the amount of plastic waste in our oceans and its impact on the environment. However, recycling plastic is not as easy as it sounds, and therefore much of our plastic waste is not usable for recycling. One of the main issues with recycled plastic material is the quality of the material. There are many different characteristics that influence this quality, for instance, the colour of the plastic waste or the amount of dirt within the plastic waste. If we want to increase the amount of recycled plastic, we should focus more on improving the overall quality of the material.
With this improvement, organisations are able to use the recycled material in more delicate applications such as packaging of food (this is currently really difficult to achieve due to many quality regulations). One possible solution for quality improvement can be achieved using advanced data analytics, which is something that the Di-Plast projects aims to do. This works in the following way:
- Think of a machine that processes plastic waste and creates new granules (small grains of plastic material to be used in creating new products). This machine has several settings and parameters on which it can create these granules. On the inside of the machine, you will find many sensors that measure characteristics of the process. think of temperature of the material, humidity, rotation speed of some specific parts from the machine. These characteristics (also called parameters) indicate the performance of the machine. When something becomes for instance too hot, the operator of the machine will receive a message to check what is going on inside the machine. However, smaller deviations are not always noticed, while they could influence the end product of the machine.
- With data analytics methods, we are able to spot these small deviations and analyse why and how they could have happened. With this information, processes and machine settings can be adjusted to prevent these small deviations and therefore improve the overall quality of the end product. How this complete analysis process works is a bit too detailed for this summarised explanation. If you are interested in the background of our analysis techniques, please contact us!
If you are interested in learning more on data analytics to improve your processes or want to be part of the Di-Plast project to co-develop or use oiur tools, just contact our experts below.
Anomalies in process data (red line) made visible via data analytics (blue line)
The concept of circular economy (CE) is currently receiving encouraging attention among scholars and industrials, as a convenient solution to move away from the linear economy concept, without neglecting the goals of sustainable development. As main goals, the closing of resource loops and the keeping of resources in the system for as long as possible at the highest utility level, are mentioned as main goals of CE. Nevertheless, most companies still adopt a linear approach or just focus on providing information to the end-user to maximize their satisfaction during the use phase, while only a small amount have approached CE in a holistic way.
This gap between aiming to implement CE principles and apply them in a holistic manner is a widespread inconsistency. The VSM-tool, which is provided within the Di-Plast project, intervenes at this exact point, and can help YOU to get a clearer and more holistic view about your internal processes (micro-level) and if possible, about your supply-chain interdependencies (macro-level).
VSM is an effective, easy to use tool to collect, evaluate, and continuously improve product and information flows within companies or interrelated supply-chains in a common and standardized manner (ISO 22468:2020). While being one of the more common lean methods, its aim is to deliver value from your customer’s perspective and continuously improve your processes. This is done according to the statement: ‘Learning to see’.
Within the Di-Plast project, the VSM method was adapted with new indicators (e.g., energy- & water consumption, scrap rate, different material flows, etc.) and visualizations, enabling a circular perspective on resource flows within companies and throughout supply-chains.
- The macro-level VSM is suited to get a better understanding about the resource flow throughout a supply-chain, regarding CE aspects. With this in mind, we visualize the overall resource flow as well as the information flow to get a better overview about the respective interdependencies. This is important with regard to misalignments between the resource recovery infrastructures (end-of-life, EOL) and the product design phase (beginning-of-life, BOL). The aim is to improve the circularity throughout a supply-chain in a holistic way, by improving the information exchange between the EOL and the BOL.
- The micro-level VSM is an analysis at a deeper, more precise level. This means that data which is important at the macro-level is being collected. Here, the aim is to get a precise overview about internal resource and information flows, regarding CE aspects. The application of the micro-level analysis is also independently possible and helps to gain valuable insights about the interrelations of internal processes. This could be for example beneficial if you are aiming to integrate internal recycling possibilities or to detect and fix inconsistencies between different processes. This is important, since the main share of non-value adding activities occurs in-between processes and not within individual processes.
Figure 1 Example of a CE adapted value stream map
Currently, the method is tested and further developed within several companies in the Di-Plast pilot phase. If you are interested in joining the pilot-phase and apply the tool together with our experts within your company or within your supply-chain to increase the overreaching cooperability, feel free to contact us. Otherwise, you still have the chance to apply the finished tool during the Di-Plast uptake acceleration program.
Selected companies are given the opportunity to participate in the development of the Di-Plast Toolkit. The aim is to increase the proportion of recycled material in their products and to improve the quality of the process and product using digital tools. By joining these pilots, companies can directly influence the development of the tools in the co-creation process. This ensures that the functions are tailored to their needs. In addition, the pilots offer many other advantages for the companies:
- Support for selection of sensor-based quality control mechanisms and support for selection of suitable software for data acquisition depending on budget and internal knowledge (Process Quality Pilot)
- High quality data allows the company to better understand the data that was gathered and to draw better informed conclusions in follow-up data analysis tasks (Process Analytics Pilot)
- Better understanding of processes through data-driven insights and visualisations (Process Analytics Pilot)
- Smart material selection, which means converters can easily select material that match their criteria and the criteria for their markets and recyclate suppliers can check the needs per market segment and have their products ready for the converters (Matrix Pilot)
- The VSM tool helps to visualise and better understand internal resource flow (time, material, energy or water) and localise bottlenecks (Value Stream Management Pilot)
- Free consultancy from data, plastics and value stream experts for the implementation of data driven solutions
If you would like to learn more about the pilots, please follow the links below.
If you are interested in beeing part of the pilots, please contact Heicke Gaedeke via e-mail.
There is still a huge gap between the goals of the European Union for plastic recycling in 2030 and the status quo today. One key chance for closing this gap is the application of digital technologies like data science to improve processes and information flows throughout the entire recyclate supply chain.
Di-Plast develops and applies digital tools to enable high value plastics recycling, i.e. bring recycled plastics to its highest application possible. Supported by Interreg North-West Europe, we aim to close the knowledge and information gaps which inhibits plastics recycling. We enable companies to achieve access to highly relevant yet mostly hidden data, parameters and analytics from and for their own production processes. To realise this, our toolkit combines a distinct set of tools:
- VSM Tool: Value stream mapping to visualise and improve process-flows.
- Sensoring Tool: a process problem / solution case library to support with the selection of suitable sensor-based quality control mechanisms.
- Data Science Tools: This is a sub-toolkit of data science applications that creates, validates and extrapolates data:
- Data Validation Tool: Assesses data, gives insights in the variables and their data quality to increase the overall quality. Allows to prove stable processes and thus high quality recyclates to your customers.
- Exploratory Pattern Analytics Tool: Works on prepared/preprocessed tabular data. It provides explanatory patterns, i.e., simple rules between parameters (e.g., temperature, pressure) that are predictive for a certain target parameter (e.g., scrap rate). This helps to identify optimisation possibilities in your process through unveiling unrecognised correlations.
- Process Analytics Tool: Provides insights consisting of reports, visualisations and other analytical methods that describe the state of your processes and/or machinery. .Using this information, production processes with recyclates can be streamlined and output quality and quantity can potentially be increased.
- Machine Data Acquisition Tool: A wiki for selection of a data acquisition infrastructure based on your budget and technical expertise.
- Forecasting Tool: A system where information is combined to predict future quantities. This tool helps to create information of future supply of plastic recyclates and therefore enhance procurement and production planning.
- Matrix Tool: The Matrix tool helps to find matches for recycled plastic suppliers and converters based on multiple given constraints
Currently, we are testing our toolkit with several companies and to validate their fit to industry’s needs. However, we are still looking for partners to test and apply these tools and for companies interested to learn about them in our uptake acceleration management.
After beeing postponed last year, the Woche der Umwelt (week of environment) will takes place online on the 10th and 11th of June. The Wuppertaler Institute will present among others the Di-Plast project at their digital booth.
InnoZent OWL e.V., invited our Di-Plast experts in the context of CirQuality OWL to present our knowledge regarding digital tools for the plastics industry in a workshop.
Di-Plast @ Online-Event "Digitalization: Successful business models for the plastics industry" Mai 4th and 5th 2021, Online
Dr. Hermann Achenbach of SKZ-KFE gGmbH is presenting Di-Plast and our digital solutions to increase of plastic recyclates uptake at the "Digitalization: Successful business models for the plastics industry" on Mai 4th 2021 at 11:10 (online).
In this interactive session the project partners will guide you to the use of digital tools for the uptake of recycled plastics in your processes.
Christoph Kugler of SKZ-KFE gGmbH is presenting Di-Plast and our digital solutions to increase of plastic recyclates uptake at the "Plastics Quality Summit" on the 17. of March 2021 at 10:10 (online).
The project team will conduct a workshop on ressourc efficiency within the value chain, presenting the aim and approach of Di-Plast at the PIUS (Production-Integrated Environmental Protection) conference in Frankfurt. This time, due to the pandemic, the event will be held online.
Holger Berg of Wuppertal Institut will speak on the 4th of March 2021 within the workshop "Use of plastic recyclates".
If you are working in the plastics industry and want to know more about our digital toolkit, please join our Webinar on the 12th of December. The Webinar starts at 15:00 PM (CET) with the duration of about one hour.
The Webinar provides an exstensive overview of the Di-Plast project and the designed tools are provided and gives you the opportunities to ask questions to our experts.
SKZ presents Di-Plast project and our open call at this year's Forum Rezyklat on the 12th of December 2019 in Karlsruhe.
Ressourceneffizienz- und Kreislaufwirtschaftskongress - Congress in German language (mainly) -
Largest congress of this kind in Europe. Two days full of information and discussion about resource efficiency and circular economy. Di-Plast will be introduced in a forum at the 23th of October. This specific presentation will be held in English.
More Information will follow - for regularly updated information go to the link below.
The co-creation workshop provides companies of the rPM supply chain the opportunity to actively participate in the implementation of the project. During this workshop, the toolkits and pilots will be presented and the companies involvment in the pilots discussed.
This workshop will be held in German.
Further information in German can be obtained by clicking on "Read More"
The Pilots - Companies co-create the toolkit together with the Di-Plast experts
Di-Plast develops and implements digital tools to increase information transparency in the value chain and to support converters in purchasing and processing rPM. These tools will be implemented, demonstrated and tested in four pilots supporting companies from the plastics value chain. These companies are directly involved in conducting the pilots forming a co-creation process to make the tools fit for their applications.
+++The Open Call is now open! Please find more information here +++
Apply for the second open call and co-create our digital tools together with our experts!
Pilot 1 - Matrix
Correlation between relevant raw material and properties and product / process requirements
One of the hindrances of using recyclate, according to the results of the Di-Plast survey and expert interviews, is the challenge in finding suitable recyclate grades for specific products. The correlation between product/process requirements is difficult to make, and in most cases field studies need to be carried out in order to validate the material selection. If converters would have a database where this aforementioned correlation is illustrated, it would be less complicated to find suitable recyclate grades. Furthermore, recompounders and material traders could use this tool in order to sell their material more efficiently.
Responsible expert: Femke de Loos, Polyer Science Park (send an e-mail) - The Netherlands
Pilot 2 – Process Analytics
This pilot focuses on the validation and analysis of process data with an easy-to-use dashboard, which you can tailor to your needs. It is equipped with different applications for data analysis, data visualisation and forecasting (e.g. waste quantities). Co-create this dashboard to make use of the digitalisation to improve your processes.
Responsible expert: Jurgen van den Hoogen and Stefan Bloemheuvel, Jheronimus Academy for Data Science - The Netherlands
Pilot 3 – Value Stream Management
Collection, evaluation and continuous improvement of product and information flow
This pilot focuses on the visualization and analysis of product and information to reduce operating cost by eliminating all non-value adding entities. The aim is to deliver value from your customer’s perspective and continuously improve your processes on a micro level (one company) or on macro level (complete supply chain). Within this pilot, you will evaluate your company or your value chain (if you can get your partners on board) together with our expert and receive information on how to improve your value streams in a holistic manner.
Responsible expert: Jeff Manger, University of Luxembourg (send an e-mail)- Luxembourg
Pilot 4 – Process Quality
Sensor data and machine data acquisition are the basic requirements for the data analytics tools. This pilot focuses on matching your skill and budget level with a suitable supplier to find the right software infrastructure for data acquisition or the right sensor to eliminate problems caused by recycling material.
Responsible expert: Christoph Kugler, SKZ-KFE gGmbH (send an e-mail)- Germany
Di-Plast develops and applies digital tools to enable high value plastics recycling, i.e. bring recycled plastics to its highest application possible. The toolkit
provides information, tips, tools and methods relating to
- data collection,
- data use,
- sensor use,
- data analytics and
- Value Stream Management (VSM)
for closed-loop supply chains.
++++ More information coming soon! ++++
VOUCHER SUPPORT FOR THE UPTAKE OF RECYCLED PLASTICS!
Are you a SME or larger enterprise and want to introduce or increase recycled plastics in your production chain?
The Di-Plast voucher scheme supports you in realising your project!
The voucher scheme is created to give companies extra support to realise project ideas that contribute to introducing, increasing and improving of recycled plastics (18 kt in total). There are three types of vouchers, each supporting unique aspects of your project ideas. These vouchers will help you work with our digital TOOLKIT, contribute to matchmaking with partners, give you access to expertise to improve your recyclate uptake or create the foundation for concrete chain cooperation.
If you want to introduce or increase the amount of recycled plastics in your processes and/or improve the material quality, you can apply for a voucher as part of of the Di-Plast support program.
Please find the application form at the end of this page.
Three types of vouchers
Matching Voucher up to 1,000 €
Supports you with finding the right match for cooperation to introduce or increase recycled plastics in your production process. The following activities can be supported:
• Partner matching
• Testing costs
Expertise Voucher up to 4,500 €
Utilise external and specialist expertise to relise your project ideas for the (increased) use of recycled plastics.
The following activities can be supported:
• Technical engineering
• Innovation consultancy
Chain Voucher up to 7,500 €
Finance specific purchases to concretize projects to increase the usage of recycled plastics in your production process. Please note that you will be requested to send three tender offers with your application.
The following activities can be supported:
•External costs for (product/quality) testing
•Process consulting services
The application periode
is now open
If you would like to prepare your application offline, you can download the application form as PDF-file at the bottom of this page. If you have any questions, please contact us!
The voucher scheme timeline (with reservation)
Frequently asked questions
Here you can find answers to your most urgent questions. For detailed information on the voucher scheme please download the Voucher Guideline at the bottom of the page. You can also contact one of the voucher-scheme-coordinators or one of the uptake managers for more information regarding your application!
The vouchers are only available for Compounders, Converters, Recyclers, Re-compounders, Companies creating commercial polymer waste, rPM-Uptake companies and traders active in the plastics sector. Please check with one of our uptake managers if your company is eligible.
With Di-Plast we want to increase the quality and quantity of the usage of recyclate and help preparing companies to be ready for the future. Thus, proposals that focus on the introduction of or increase of the usage of recyclate in your company’s production process are welcomed. Moreover, we want to stimulate interregional cooperation. Furthermore, the vouchers are part of the Di-Plast program and we offer digital tools to improve the usage of recyclate. Vouchers aim to help you to work with the tools as well. Soon, the application form will be published on this page. Here you can see what we asked and you can prepare your application to contact one of our uptake managers.
In short, the first open call for applications will open on 30-4-2021. You can send your proposal through the application form on the website (link will open soon). We would urge you to look at the template version first in order to prepare your proposal.